The basic appearance quality requirements of cosmetic packaging materials are described briefly
J) outer boxes (including flower boxes, plastic seals, medium boxes, transport packaging, etc.
2. Packaging material requirements
The materials used in the packaging of cosmetic products must be safe and should not cause harm to the human body.
3. Packaging appearance requirements
The bottle should be a smooth, smooth surface, the basic thickness of the bottle wall uniform, no obvious scars, or deformation, and there should be no cold explosions and cracks. Bottle mouth should be straight and smooth, not burr (Burr), thread, clip with a good structure, correct. The bottle and cap should be tight, with no sliding teeth, loose, and no leakage. Inside and outside the bottle should be clean.
(2) outer cover: The outer cover shall be straight, smooth, without breakage, crack, and Burr (Burr). The color of the outer cover should be uniform. The thread-fitting structure of the outer cover shall be intact. Add anodized aluminum or bronzing cover color should be uniform. The outer cover of the flapper type should be turned up flexibly, and the connecting parts are not broken. Cap and bottle should be closely matched, with no sliding teeth, loose.
Bags should not be used for obvious wrinkles, scratches, or air bubbles. The color of the bag should be uniform. The bag should be firmly sealed, there should be no openings, perforation, or leakage (paste) phenomenon. Composite bags should be composite firm, uniform coating.
Hose body should be smooth, clean, uniform in thickness, with no obvious scratches, and color should be uniform. Hose sealing to be firm, and correct, there should be no opening, or wrinkle phenomenon (mold normal indentation except). Hose lids shall meet the requirements of 5.3. The composite film of the hose should not float.
The box surface should be smooth, and correct, there should be no obvious bottom scratches, burrs (burrs), serious pressure, and damage phenomenon. Box opening tightness should be appropriate, take the flower box, can not be forcibly peeled with fingers, to pinch the edge of the lid, the bottom does not fall as qualified. The mirror surface of the box, the contents, and the box should stick firmly, the mirror image is good, no exposed scratches and damage phenomenon.
Tank Flat, no rust spots, smooth weld, no obvious scratch, concave tank phenomenon, color should be uniform. The nozzle of the spray tank should be smooth and free from wrinkles, cracks, and deformation. The cover of the spray tank shall meet the requirements of 5.3.2.
The spindle tube body should be straight, and smooth, with no crack, Burr (Burr), should not have obvious scratches, color should be uniform. The fitting of the spindle tube should be suitable for tightness and tightness to ensure that the contents can be rotated out or pushed out normally.
Make-up pen and pen cover should be smooth, and correct, do not open glue, film should not crack. Make-up pen penholder and pen cover should be loose and tight fit. Make-up pen color should be uniform.
The sprinkler should be upright, and clean, with no damage or crack phenomenon. Nozzle components should be complete, to ensure a smooth spray night.
Cosmetic packaging printing patterns and handwriting should be clean, clear, not easy to fall off, and uniform in color and luster. Cosmetic Packaging labels should not be wrong, missed, upside down paste, paste should be firm. Label requirements in accordance with GB 5296.3.
(3) plastic seal: plastic seal should stick firmly, with no crack phenomenon. The plastic surface should be clean, with no damage phenomenon. There is no mistake in plastic packaging, leakage, or flip-flop phenomenon.
(4) transport packaging: transport packaging should be clean, correct, smooth, and firm sealing. Product error-free loading, leakage, flip-flop phenomenon. The marks on the transport packages shall be clear, complete and in the proper position, the product name, manufacturer's name and address, net content, product quantity, box quality (gross weight), volume, production date, and shelf-life or production lot number and use-by date shall be indicated as required. Should be selected according to the needs of the GB/T 191 logo.
View More(Total0)Comment lists